December 24th: Open until 12pm – December 25th: Closed – December 31st: Open until 12pm – January 1st:  Closed –  January 6th: Closed

Honda WT40 Trash Pump

SKU: WT40

$2,499.00

Call Us For The best Deal!

Description

 

 

4″ trash pump

  • 423 gal./min capacity
  • Solid handling capability up to 1 1/16″
  • Cast iron volute and impeller
  • Quick clean out port

Specifications

Engine GX390
Displacement 389 cc
Bore and stroke 3.5″ x 2.5″
Compression Ratio 8.2:1
Oil Alert Std
Pump Type Trash Centrifugal Self-priming
Volute Rigid Mounted Cast Iron w/ Stainless Wear Plate
Impeller Conical Cast Iron
Mechanical Seal (Pump case / impeller)Silicon Carbide/Silicon Carbide
Priming time 150 sec. @16.4 ft.
Drive system Direct
Discharge capacity 423 gal/min
Suction port diameter 4″
Discharge port diameter 4″
Total head lift 82 ft.
Suction head lift 26 ft.
Maximum pressure 36 psi
Solids handling 1 1/16 inches
Dimensions (LxWxH)28.9″ x 21.1″ x 22.2″
Dry weight 172 lbs.
Fuel Capacity 1.6 gal
Run Time @ Max Discharge 1.5 hr
Strainer Part #78325-YG2-003
Residential Warranty 24 months
Commercial Warranty 12 months

Features

Heavy-duty 4" construction trash pump
Heavy-duty 4″ construction trash pumpSpecially designed for job sites and applications where high volume trash water capacity is needed.

Easy starting Honda OHV commercial engine
Easy starting Honda OHV commercial engineThe durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

423 gal./min capacityThe WT40 moves the most water out of any Honda pump.

Solid handling capability up to 1 1/16″The specially designed impeller allows solids to pass through easily, without clogging.

Heavy duty full frame protection
Heavy duty full frame protectionProtects the pump, while offering a convenient tie down location for transport.

Easy quick clean out port
Easy quick clean out portThe WT40 is designed for quick and easy service. An easy access service port makes clean-out quick.

Replaceable stainless steel wear plateThe volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs

Standard service tool
Standard service toolA convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.

Durable silicon carbide mechanical seal
Durable silicon carbide mechanical sealFeatures abrasion-resistant silicone-carbide seals for extended wear.

Cast iron volute and impeller
Cast iron volute and impellerThe rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Isolation mounted engine and pump
Isolation mounted engine and pumpHigh performance mounts minimize vibration, keeping the pump from “walking away or “burying itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump’s durability.

Unique conical shaped impeller
Unique conical shaped impellerThe unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.

Protected by Honda Oil Alert®Protects the pump by shutting the engine off when low oil is detected.

Large heavy duty metal strainerThe strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.